We carry Heil's full product line but only have the most common items listed
here. If you don't see what you are looking for
E-mail sales and one of our experienced
staff will respond with pricing and availability.
Notes for Icom IC-7000 Users
Heil PR-781: Professional quality dynamic cardiod microphone
The PR-781 is the successor to the very popular PR-780 but in a more compact enclosure that
is eye-catching and downright beautiful. The PR-781 gives you a full-bodied tone quality, with
crisp high-frequency articulation, made famous by the original PR-780. The PR-781 comes with
the 5/8-27 mount.
Requires CC1-XLR Cable
Options: CB-1-PTT base stand, PL-2T, HB-1 or SB-2 boom, FS-2 foot switch or HS-2 hand switch PRSMx shock mount
|PR-781||Heil professional quality dynamic cardioid microphone||$139.00|
|PR-781G||Heil professional quality dynamic cardioid microphone, gold screen||$159.00|
Heil PR10 Package: This small but mighty microphone will bring your radio to life with full speech
articulation and perfect balance. This package contains Heil’s compact PR10 microphone, an LB-1 table base with an LED backlit
transmit status light, and an adjustable 8" mic boom to bring the mic up to a comfortable operating position during use.
The PR10 is Heil’s newest communication microphone designed for articulate communication with most of todays transceivers. Although compact in size this microphone is built around a full 1-1/8" diameter dynamic element, just as our other PR series microphones used in commercial broadcast applications around the world. Producing full articulate sound from 85Hz to 16kHz you will be sure to be heard with every transmission. Some Non-Pro series ICOM transceivers do not have adequate mic pre ampfification to support a dynamic element and an external preamplifier may be required.
The PR10 Package includes a LB-1 table base. This sleek, sturdy table base will keep your PR10 microphone at a comfortable
height for hours of use. Integrated into the base we have a PTT control and an LED backlit indicator with three settings. The LEDs
that illuminate the face and ring of the LB-1 base may be set to continuously glow, illuminate only while transmitting, or turned off
with the three-position switch located on the right side of the base. Like our popular CB-1-PTT base, the LB-1 base has a 1/8" jack
on the back and includes a 24" pigtail to interconnect the base to the proper CC1-XLR-x connecting cable. LB-1 requires 2-AA batteries
(not included) for illumination.
|PR10 Package Microphone|
|PR10PKG||Heil professional quality dynamic microphone, boom and LB-1 base
Pre-Order Now - Shipping Mid-Late November
Heil HMM: Hand Microphone. The unique design of the HMM eliminates the hollow, clam shell
sound of hand mics of the past. This has been achieved by designing an open grill on top of the microphone case which detunes
the internal hollow resonance of the housing.
The HMM is offered as the HMM and the HMM-iC. The HMM is equipped with a full range dynamic microphone element with
great articulation. The HMM-iC is equipped with our iC electret element. The flexible, but sturdy, coil cable terminates to
a 1/8" male for the microphone and a ¼" male for PTT control. It is compatible with all of the Heil AD-1 adapters.
|HMM Hand Microphone|
|HMM||Heil professional quality dynamic hand microphone||$76.95|
|HMM-iC||Heil professional quality hand microphone with iC element for early ICOM radios and IC-7000/7100, requires AD-1iC or AD-1iCM adapter||$76.95|
Heil Gold Elite microphone is designed and crafted specifically for
amateur radio communications. It contains two distinctly different high performance dynamic
elements that are available at the flip of a switch to meet the different types of communications.
The WIDE position has the HEIL Elite full range element producing smooth articulate 60Hz - 16 kHz audio with the traditional Heil +4 dB peak centered at 2 kHz. This gives the new Gold Elite excellent voice articulation along with its ‘big bottom’ low end that is so important for producing a well balanced, studio quality SSB signal. The NARROW position features the new HC-5.1 dynamic element.
The GM-V (Vintage) is a unique, innovative microphone renowned for its gorgeous audio production. It's crystal clear response made it an instant best-seller, and it is the microphone of choice in thousands of Ham shacks around the world today. The GM V Microphone has been designed for full-range articulate SSB audio. Specifically when used with a high impedance input, usually tube type vintage equipment (Collins, Central Electronics, Hallicrafters, etc.)
The Gold Elite microphone comes to you with a foam windscreen and a 5/8"-27 microphone clip that is designed for our booms and desk stands.
|Gold Elite Microphone|
|GM-Elite||Heil Gold Elite series dual element dynamic microphone||$128.00|
|GM-V||Heil Vintage series microphone for high impedance input radios (Collins, Central Electronics, Hallicrafters, etc.)||$138.00|
Heil HM-12 microphone is designed specifically for amateur radio
communications. The high output full range ‘Genesis’ dynamic element is designed to work with just
about every amateur radio low impedance transmitter. The element is mounted in a unique internal
shock mount and exhibits nearly -35 dB of rear rejection, which reduces background and ambient
noise from the transmitted signal.
The Heil HM-12 exhibits a very natural audio response from 80Hz - 14 kHz. The traditional Heil +4 dB peak centered at 2 kHz gives the new HM-12 excellent voice articulation balanced with clean, clear low-end response producing a high quality AM, FM or SSB signal.
The HM-12 microphone has an internal foam windscreen and includes a 5/8"-27 microphone clip that is designed for our booms and desk stands.
|HM-12||Heil "Genesis" series dynamic microphone||$59.00|
Handi Mic: For years, Bob Heil has been working on eliminating the
hollow, clamshell sounds of the hand microphone. There is no argument, when you
place a high quality microphone element inside a shell, the end result sounds
like you are talking from the bottom of a barrel!
Bob designed a very special open sorbothane shock mount that puts the various Heil microphone elements in the open, not encased in a shell. This results in the cleanest, clearest and most articulate hand microphone - EVER! The low handling noise and exceptional cardioid pattern makes the Handi Mic ideal for mobile or portable use.
The Handi Mic terminates in the traditional Heil 4-pin XLR broadcast connector allowing the Heil CC-1 connecting cables to be used.
Requires CC-1 Cable or CH-1 Cable
|Handi Mic Microphones|
|HM-iC||Heil, Handi Mic with iC Element for Non-Pro series Icoms, IC-706/746/756/718/7000/7100/7200(Read More), 4-pin XLR with PTT||$89.00|
Heil PR-20: Professional Dynamic Cardioid Studio Microphone. This is a professional quality
dynamic cardioid microphone designed for commercial broadcast and recording. The PR-20 delivers a
smooth flat response over a wide frequency response. The PR-20 has a comparable sound to the finest
condenser microphone because of it's wide frequency response, excellent transient response and low
The PR-20 achieves it's exceptional performance by using a special magnet structure and a large aluminum 1-1/8" low mass voice coil assembly with smooth 40 - 18,000 Hz. frequency response. It produces a beautifully smooth audio response without the inconvenience of phantom or outside d.c. powering.
The Heil PR-20 professional microphone is delivered to you in a classy leatherette carrying bag including the mic clip and acoustical foam windscreen.
Requires CC1-XLR Cable
|PR-20||Heil professional dynamic microphone Add to cart to see your price||$$$.00|
Heil PR-30: Professional Dynamic Cardioid Studio Microphone. From the Professional
division of Heil Sound, Ltd. The PR-30 is a professional quality dynamic cardioid microphone
designed for commercial broadcast, recording and live sound reinforcement applications which
require a smooth flat response over a wide frequency response. The PR-30 exhibits gorgeous natural
speech articulation without having to apply heavy electronic equalization. Truly one of the most
natural and pleasant sounding dynamic microphones, ever.
The cardioid pattern offers the greatest rejection at 180 degrees off axis which is directly behind the microphone and creates virtually no off-axis coloration while providing the greatest possible rejection of unwanted audio.
Comes with the 5/8"-27 mount assembly.
Requires CC1-XLR Cable
|PR-30||Heil professional dynamic microphone Add to cart to see your price||$$$.00|
|PR-30-B||Heil professional dynamic microphone, matte black finish, with red mesh grill - Allow 7-10 days for shipment
Add to cart to see your price
Heil PR-40: Large Diameter Dynamic Studio Microphone. Designed for the commercial
broadcast and recording studio market, the PR-40 features the new technology of the Heil DM 6
dynamic element with response down to 28 Hz. and stays perfectly flat up through 18kHz. with a
beautiful mid range rise giving this new microphone gorgeous vocal articulation. It truly
outperforms many of the current microphones that all use at least 30 year old technology.
Gorgeous craftsmanship, high quality components and a beautiful champagne luster finish with
the most articulate, natural sound from a dynamic, the PR-40 will soon become the sound industry
Requires CC1-XLR Cable
|PR-40||Heil large diameter dynamic studio microphone Add to cart to see your price||$$$.00|
Heil iCM Microphone (for Icom only): Do you own an older Pre PRO
series Icom? Heil Sound has introduced a microphone just for you. The iCM will
answer the audio problems for early ICOM transceiver owners. After a year of
studying the mic preamps iCM for ICOM only and working closely with ICOM AMERICA
Heil introduced their 'iCM' microphone, not the inexpensive electrets so common
today, but a high performance electret with very high output to drive the low
gain front ends of the early ICOM and exhibiting wide frequency range.
The 'iCM' contains the new 'Heil 'iC' element in a beautiful new platinum finish body perfect for hand held use or mounting on a desk stand or microphone boom. It is supplied with a universal mic clip that will interface with a variety of stands and booms.
The 'iCM' comes complete with an self attached 5' length of the 'Heilwire' cable and terminates in the familiar 8 pin Foster connector wired to mate with all early 8 pin ICOM front ends. A 1/4'" female pig tail exits this 8 pin connector that allows the interface of a foot switch or hand switch to control the PTT line. A 'Soft touch' PTT switches is mounted on the body of the 'iCM'.
The frequency range of the new high performance Heil 'iC' element is 35Hz to 12,000 Hz @ -3dB. Perfect for the early ICOM audio preamplifiers.
Note: For pre PRO series such as 735,745,751,756,761,765,781,775, etc. Read More
Will Not work with IC-720, IC-730 or IC-740
Options: CB-1-PTT base stand with PTT,
PL-2T, HB-1 or SB-2 boom, SM-1 shock mount, FS-2 foot switch or HS-2 hand switch
|iCM||Heil microphone for older ICOM radios||97.00|
|We carry Heil's full product line but only have the most common items listed here. If you don't see what you are looking for E-mail sales and one of our experienced staff will respond with pricing and availability.|