Lido


Lido Radio, Mounts and Accessories
  Part Number Desc Price Buy
LM-100 Vent mount with AMPS plate/EXP mic holder. Use the 4-hole pattern AMPS plate to attach your remote display head bracket. Or, use it as a button style microphone holder.

To hold an HT, cell phone, GPS unit, etc... add an optional LM-H or LM-H208 holder:

Note: - The vent mounts should be considered as semi-permanent because removing and re-inserting the vent clips onto the vent louvers can be difficult.
-Not for use with round or vertical vents.

$11.96
LM-100H Vent mount with side-grip holder included. Place your HT, remote display head, Celt phone, GPS unit etc...in the holder, and squeeze the arms together. The device is securely held in place until you press the side release button. The support legs are removable in case you want to use it horizontally.

Note: - The vent mounts should be considered as semi-permanent because removing and re-inserting the vent clips onto the vent louvers can be difficult.
-Not for use with round or vertical vents.

$22.00
LM-25 Friction (bean bag) mount for suction cup and adhesive base device holders. Perfect for moving your Lido Mount between vehicles, into a rental car, etc... Includes an adhesive back safety hook to keep the bean bag in place.
For use with: LM-400EXP, LM-500H, LM-502H, LM-600, LM-601, LM-700, LM-900
$18.00
LM-2500H Bean bag and suction cup mount, combination package of the LM-25 and LM-500H $38.00
LM-300 Seat Bolt or Floor Mount, 20" Gooseneck, comes with a combination AMPS plate/microphone button hook/belt clip hook. $23.95
LM-400EXP Suction cup mount with 7" gooseneck.

To hold an HT, cell phone, GPS unit, etc... add an optional LM-H or LM-H208 holder:

$17.95
LM-500H Low vibration suction cup mount with multiple mounting options. Attach it to your windshield, or use the adhesive disk to provide a smooth suction surface on the dash or console. $22.00
LM-502H Low vibration suction cup mount with narrow side grip holder (LM-H208) for smaller devices included. Attach the suction cup to your windshield, or use the included adhesive disk to attach the LM-502H to the dash or console. Open the spring-loaded arms, set the device inside, release the arms. The arms open to a maximum of 4.75", rotates for vertical or horizontal position. Included is a combination AMPS/EXP mount. Use it to attach your remote display head bracket, or use it as a button type microphone holder. $22.00
LM-801EXP Cup holder Mount. Insert into any cup holder, turn the expansion nut, and the base expands to fit snugly in the cup holder. Comes with a combination AMPS plate so you can attach your existing remote display head bracket, and with an EXP mount that will act as either a belt clip or mic button holder.
To hold an HT, cell phone, GPS unit, etc... add an optional LM-H or LM-H208 holder:
$21.95
LM-AD1 Mounting adapter to utilize the threaded socket in a control head. A threaded stud on the LM-AD1 screws into the back of the control head and is then attached to any of the following Lido Mounts: LM-300, LM-500H, LM-400EXP, LM-801EXP $8.75
LM-H Optional side-grip holder. Place your device in the LM-H and squeeze the arms together. Push button on the side releases the arms. Holds large size HT's, remote display heads, GPS units, cell phones etc. Support legs are removable when using the LM-H horizontally. (shown with LM-801EXP)
For use with: LM-100, LM-300, LM-400EXP, LM-601, LM-801EXP
$13.00
LM-H208 Optional narrow side-grip holder. The spring loaded arms are opened, the device set inside, and released... holds smaller items like the IC-208 remote head firmly in place. The arms open to a maximum of 4.75", use it vertically or horizontally. (Shown with LM-100)
For use with: LM-100, LM-300, LM-400EXP, LM-601, LM-801EXP
$11.00
LM-1201 Adhesive back hook for ICOM type microphones, 3M adhesive is used for maximum holding power $4.95
LM-1202 Adhesive back button holder for YAESU/KENWOOD type microphones, 3M adhesive is used for maximum holding power $6.95